| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Introduction
Optical Fiber Cable Tensile Tester (Indoor Cable) are designed specifically for indoor (Bow Type) optical fiber cables to test tensile strength under tension. The tester compliments with an extensometer to measure the cable. Test cable sample is wound over the approximate sized sheave, pulled at a specific rate until a pre-determined tension is applied. The test cable is further laid to rest under tension as per detail specifications, and then the attenuation and fiber length are measured.
Features
This equipment adopts computer control, servo motor drive, precision ball screw drive load, and precision load sensor signal measurement. It has the characteristics of stable loading, accurate measurement, rapid control response, various control methods, convenient and accurate digital calibration of load and elongation, and full load protection and position protection.
| Technical Parameters | |
| Model | HL-GLY-2 |
| Load capacity | 2KN (other loads are available upon request) |
| Crosshead travel | 1000 mm |
| Loading speed | 0.2 - 500 mm/min |
| Force Measurement Range | (1%~100%) F.S. |
| Force resolution | ±250000 yards, the whole process is not divided, the resolution is unchanged |
| Accuracy of force indication | ±0.5% |
| Force holding time | Not less than 3 hours, can be set arbitrarily |
| Deformation measurement range | 0 - 50 mm |
| Deformation resolution | 0.001 mm |
| Accuracy of deformation indication | ±0.5% |
| Stretching space | 25m |
| Effective stretching stroke | 500mm |
| Diameter of chuck and guide wheel | 250mm |
| The maximum diameter of the optical cable that can be clamped | 12mm |
| Weight | 700kg |
){kind=link}