Computerized Electromechanical Universal Testing Machine for Rubber/Plastic/Elastic
Product Description
Introduction:
HUALONG HLE series electromechanical testing machines offer force, displacement or deformation closed loop testing in tension, compression, flexure, shear, tear and peel etc.. The machine can be equipped with a variety of accessories including: grips, fixtures, compression frames, thermal cabinets and extensometers covering all relevant applications as testing of rubber, plastics, foils, films, textiles, adhesives, paper, foods, foams, timber, wires or other metallic or non-metallic specimens and medical, electronic and other components. The load frames are rigid constructed, providing superior axial and lateral stiffness.
Advantage:
Improved load accuracy range
Increased data rate
Improved speed accuracy
Wider speed range
Faster return speed for greater productivity
Increased frame stiffness
Improved alignment.
Rig id and reinforced Plastics/ Composites:
GBT 1448 Fiber -Reinforced plastics composites-determination of compressive properties; GBT 1040[1].1 Plastics- determination of tensile properties;
EN ISO 6259 - parts 1/2/3 Determination of tensile properties of thermoplastic pipes; GBT8804.3 Thermoplastic pipes-Determination of tensile properties;
EN ISO 527-1 - parts 1/2/3 Determination of tensile properties on plastics; ASTM D638 Standard Test Method for Tensile Properties of Plastics
ISO 604 Plastics - determination of compressive properties
ASTM D695- Plastics -- Standard Test Method for Compressive Properties of Rigid Plastics EN ISO 9969 Determination of ring stiffness on thermoplastic pipes;
ISO 14125 Flexural Properties of Fiber-Reinforced Plastic Composites
ASTM D3846 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics GBT 9647 Thermoplastics pipes-Determination of ring stiffness;
EN ISO 13968 Plastics piping and ducting systems -Thermoplastics pipes-Determination of ring flexibility;
EN ISO 844 Determination of compression properties;
Rubber:
GBT 528 Rubber, vulcanized or thermoplastics-determination of tensile stress-strain properties;
ISO 37 Rubber, vulcanized or thermoplastics-determination of tensile stress-strain properties;
Geo-textiles:
BS EN ISO 10319 Geotextiles -Wide-width tensile test;
GBT 15788 Geotextiles and geotextiles-related products -Wide-width tensile test; ASTM D3950 Standard Specification for Strapping, Nonmetallic (and Joining Methods);
JBT 8521(EN 1492-2): Textile slings. Safety. Roundslings, made of man-made fibres, for general purpose use; ASTM D 6775-02 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material;
Metal:
ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials GBT 228 Metallic materials-tensile testing at ambient temperature
ISO 6892 Metallic materials - Tensile testing - Method of test at ambient temperature BS EN 10002-1Determination of tensile properties on metals
GB 4338 Metallic materials tensile testing at elevated temperature
BS EN 10002-5: Metallic materials -Part 5: Method of test at elevated temperatures
ASTM E21: Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials IS0 783: Metallic materials -Tensile testing at elevated temperature
EN ISO 7438 Determination of flexure tests on metals; GBT 232 Metallic materials- Bend test
ASTM F606: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ISO 14589: Blind rivets - Mechanical testing
GB 3098.18: Mechanical properties of fasteners-Blind rivet testing
SAE J429: Mechanical and Material Requirements for Externally Threaded Fastener
Application range:
-composite-( strip, plate, strip, webbing, sheet), metals-(wire, rod, tube, strip, plate, strip), fasteners (tensile, proof, single and double shear), construction materials (reinforcement bar, wire, mesh, folding) and components) and more
Product Parameters
Technology parameter:
| Model |
WDW-5C |
WDW-10C |
WDW-20C |
| Load frame |
| Capacity |
5kN / 1,125 lbf |
10kN / 2,250 lbf |
20kN / 4,500 lbf |
| Load Resolution |
Capacity / 500, 000 (fully auto scaling of single measurement range) |
| Test area width |
400mm / 16 inch |
| Maximum Crosshead Travel |
1150 mm / 45 inch (excluding grips) |
| Maximum tensile space |
1050 mm / 41 inch |
| Height |
1670 mm / 66 inch |
| Model |
WDW-30C |
WDW-50C |
| Load frame |
| Capacity |
30kN / 6,750 lbf |
50kN / 11,250 lbf |
| Load Resolution |
Capacity / 500, 000 (fully auto scaling of single measurement range) |
| Test area width |
500mm / 20 inch |
| Maximum Crosshead Travel |
1100 mm / 43 inch (excluding grips) |
| Maximum tensile space |
1000 mm / 39 inch |
| Height |
1880 mm / 74 inch |
| Width |
530 mm / 21 inch |
| Length |
970 mm / 38 inch |
| Weight |
500 kg |
| Noise level measured at maximum test speed |
58 dB(A) |
| Model |
WDW-200C |
WDW-300C |
| Load frame |
| Capacity |
200kN / 45,000 lbf |
300kN / 67,500 lbf |
| Load Resolution |
Capacity / 500, 000 (fully auto scaling of single measurement range) |
| Test area width |
600mm / 24 inch |
| Maximum Crosshead Travel |
1250 mm / 49 inch (excluding grips) |
| Maximum tensile space |
700 mm / 28 inch |
| Height |
2515 mm / 99 inch |
| Width |
715 mm / 28 inch |
| Length |
1290 mm / 51 inch |
| Weight |
1500 kg |
| Noise level measured at maximum test speed |
58 dB(A) |
| Model |
WDW-500C |
WDW-600C |
| Load frame |
| Capacity |
500kN / 112,500 lbf |
600kN / 135,000 lbf |
| Load Resolution |
Capacity / 500, 000 (fully auto scaling of single measurement range) |
| Test area width |
620mm / 24 inch |
| Maximum Crosshead Travel |
1220 mm / 48 inch (excluding grips) |
| Maximum tensile space |
600 mm / 24 inch |
| Height |
2460 mm / 97 inch |
| Width |
920 mm / 36 inch |
| Length |
1280 mm / 50 inch |
| Weight |
2000 kg |
| Noise level measured at maximum test speed |
58 dB(A) |
Company Profile
Certifications
Packaging & Shipping
){kind=link}