| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Introduction
The Optical Fiber Cable Abrasion Tester is designed to determine the ability of an optical fiber cable sheath and markings to resist abrasion.
• Method E2A: Abrasion Resistance of Optical Fibre Cable Sheaths
• Method E2B: Abrasion resistance of optical fibre cable markings
• Method E2B 1: Suitable for rigid marking types like embossing, indenting and sintering
• Method E2B 2: Applicable to marking types other than embossing, indenting and sintering
Apparatus
The abrasion test rig consists of a device designed to abrade the surface of the cable in both directions parallel to the longitudinal axis of the cable over a length of 10 mm ± 1 mm at a frequency of 55 cycles/min ± 5 cycles/min. One cycle consists of one abrading edge movement in each direction. The abrading edge shall be a steel needle with a diameter as specified in the detail specification.
| Model | HL-GMS-100 Series | |
| Abrading stroke for sheath | 10 mm | |
| Abrading stroke for markings | Method 1 | Method 2 |
| Abrading stroke cycles | 1 ~ 9999 times | |
| Abrading frequency | 55 ± 5 cycles/min | |
){kind=link}