| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Introduction
Optical Fiber Cable Water Penetration Tester (mechanical base) is designed to determine the ability of a cable to block water migration along a specified length. Compliance shall be checked on samples of cable using one of the two following methods (F5A or F5B). Method F5A tests for water migration between the outer interstices of the optical core and the outer sheath, whereas method F5B tests for water migration over the entire cross-section designed to be water-blocked.
Test Procedure According to Method F5-A
Test Procedure According to Method F5-B
Procedues
Unless otherwise specified in the detail specification, the sample shall be supported horizontally and a 1m height of water shall be applied for 24h, at a temperature of (20 ± 5) °C. A water soluble fluorescent dye or other suitable coloring agent maybe used to aid in the detection of water seepage. Care should be taken in choosing a fluorescent dye that does not react with any of the cable components.
| Model | HL-GSS-1000 |
| Water cylinder | ø80 x 1000 mm |
| Pulling speed | ø30 x 8 mm |
| Applicable cable diameter | Up to ø40 |
| Duration of test | 24 hours |
| Maximum cable length under test | 1m |
){kind=link}